Select your region:

TabCabby 20-32 Vertical Charge & Sync

20 to 32-Device Mobile USB Charge & Sync Trolley for tablets up to 11″ – Portable Baskets

SKU:

TABCAB20-32VBLC&S

RANGE:

TABCABBY

Product description

The TabCabby 20-32 Vertical Charge & Sync charges 20 to 32 tablets up to 11″ screen size – including protective cases via a USB A Hub.
With portable baskets with Adjustable Dividers store 5 to 8 tablets each, depending on the size of the protective cases in use.
It simultaneously charges & synchronises with the Boost+ 16-USB A managed hub mounted in the side of the cart, delivering high-speed charging and syncing saving time when deploying apps, media and content.
This unit charge, connect, manage & monitor the state of all ports and attached devices.
It never overcharges as it detects when the device battery is full providing trickle charge.
It is easy to move ergonomic top handles, rounded corner bumpers and multi-directional non-marking wheels.
With Support for Life with Lifetime Warranty (5 years electrical), shipped fully assembled.

Product summary

Range

TABCABBY

Type of device

Tablet

Device screen size

Up to 11"

Number of devices

Up to 32

Charge & Sync

Charge and Sync

Type of charging

USB Type A

Watts per port

USB-A up to 10.5W

Type of unit

Mobile unit

Full product information

Product features

Devices are stored vertically in ABS injection moulded portable baskets with adjustable dividers to accommodate protective cases
Portable baskets sit on sliding shelves, two per shelf, to allow the devices to be removed and replaced easily
Includes electrostatic discharge (ESD), over-voltage, over-current and over-temperature protection
Check the Compartment Dimensions in Technical Specifications below

Charges 20 to 32 tablets up to 11″ screen size – including protective cases
Two Boost+ 16-USB A hubs are clip-mounted in the side of the cart to power and sync devices and can be unclipped and used externally if required
Auto-detects attached devices individually and automatically adjust the current output to the highest level permitted by the device manufacturer and USB specifications
Once fully charged, trickle charging will commence at a rate equal to its self-discharge rate, enabling the battery to remain at 100%
IEC socket with 1.8m / 6ft power cord designed to snap out if pulled away from the wall to prevent damage

Managed USB A hub/s delivers high-speed data transfer rates for syncing and works independently to the Operating System (OS), data transfer can be performed to all common mobile operating systems, such as iOS, Android and Microsoft
Simultaneously synchronise devices using MDM software such as Apple Configurator, iTunes and others, saving time when deploying apps, setting up profiles, media and content – Boost+ is transparent to the MDM software and the host computer, the host computer recognises only the mobile devices
Working independently to the OS you can charge, connect, manage and monitor the state of all ports and attached devices using the Cambrionix LiveViewer App
Device ID and serial numbers can be associated with port number and charging data to reveal how much charge each device has received, whilst switching between charging and syncing modes
Enables you to sync (data transfer) and charge the device at an enhanced rate that other USB hubs cannot, most UBS hubs charge devices at a trickle rate while syncing. Our hubs are built differently and offer the valuable feature of being able to charge devices while they are in sync mode
Designed to provide a charge rate of approximately 1.5A in sync mode, by utilising the CDP (Charging Downstream Port) functionality built into our hubs and devices. A normal sync rate charge is 500mA. This is ideal if you need to leave devices connected to a host to sync and charge overnight, as it means they will charge whilst syncing and continue after the data transfer has completed, ensuring the device is fully charged when needed

Cables feed from the side power compartment to the front device compartment via individual cable channels, keeping cables organised and damage free
All cables are plugged into the power supply in the side lockable compartment, preventing cables being removed from the front device compartment

Ergonomic wide grip ABS handles for light touch easy movement
Fitted with large all directional swivel, non-marking hospital grade rubber wheels (2 braked)
Thick steel binding plate connects heavy duty wheels to the cart ensuring wheels never buckle or loosen
Compact design with narrow space-saving footprint
Rounded corners fitted with rubber corner bumpers and extrusions for shock absorption to prevent damage to walls and devices inside

Separate secured power compartment for ultimate safety and security
Concealed lever unlocks side power compartments to enable clear access to cables and AC adaptors when required
Built-in heat sensor will shut off power if a device overheats or if interior temperature reaches 32C/90F degrees to prevent risk of fire or damage to devices
Silent ventilation system includes side and rear vents plus a uniquely designed weldmesh base to keep devices cool with constant air circulation without the need for a noisy fan that can spread germs
Locking system mounted on top surface to avoid keys snapping inside lock during movement
Dual point locking system, with keys provided, to secure at the top and bottom of both device and power compartment to prevent theft, damage or tampering
Inset door handles prevent protruding parts eliminating breakages
Safety tested and certified by the independent Underwriters’ Laboratory (UL)

Ships fully assembled with handles and wheels fitted
Large L shaped doors open wide for easy access to devices and cable management compartments
Third party software to synchronise devices is not supplied
Instruction Booklet supplied with technical support via phone, email or 24/7 live chat on hand

Technical specifications

W700 x D550 x H1010 mm / 27.6″ x 21.7″ x 39.8″
W200 x D285 x T12/25 mm / 7.9″ x 11.2″ x 0.5/1″
Feature not available
UK – 240 volts / USA & Canada – 120 volts
50 / 60 Hz
1.8 m / 6 ft

Warranty and certifications

Lifetime Warranty (5 Year Electrical)
CE Certified | EN 62368-1:2014
CE Certified | EN 62368-1:2014
CAN/CSA C22.2 No. 62368-1:2014
UL 62368-1:2014
ISO 9001 & ISO 14001
All products are tested to the highest standard worldwide. Safety testing is a high priority to LapCabby. We do not release any products unless the it has been completely tested and certified including electrics, materials, construction and components. Safety testing includes the normal operating conditions of the product plus testing for faults, misuse, temperature, fire, risk, electric shock and injury.

Support documents

Spec sheet

Please download the spec sheet of this product.

Instruction manual

Please download the instruction manual of this product.

Product warranty

Please download the warranty of this product.

Product video

Product video currently not available

LapCabby is committed to protecting and respecting your privacy, and we’ll only use your personal information to administer your account and to provide the products and services you requested from us. From time to time, we would like to contact you about our products and services, as well as other content that may be of interest to you. If you consent to us contacting you for this purpose, please tick below to say how you would like us to contact you:

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy. By clicking submit below, you consent to allow LapCabby to store and process the personal information submitted above to provide you the content requested.

LapCabby is committed to protecting and respecting your privacy, and we’ll only use your personal information to administer your account and to provide the products and services you requested from us. From time to time, we would like to contact you about our products and services, as well as other content that may be of interest to you. If you consent to us contacting you for this purpose, please tick below to say how you would like us to contact you:

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy. By clicking submit below, you consent to allow LapCabby to store and process the personal information submitted above to provide you the content requested.

  • User Code is any 6 digit single entry code that can be input to lock and unlock a single compartment, once unlocked the lock will reset ready for the next user
  • Technician Code is a factory default code to be reset upon first use to ensure security, this code allows access to any compartment if a User Code is forgotten
  • Master Code is a factory default code for each lock that will restore the digital lock back to factory its setting, removing access using any previous codes installed